CALL US: 0431 437 127

USED TREADMILLS

"Little Ripper" Classic Short Deck Trotting / Cantering Treadmill

Specifications
Make Classic Treadmills
Model CMD – Walk on, walk off (walk through)
Deck Length Short (approx. 3.3 metres roller centre to roller centre)
Year 2001
Minimum Speed 1 km/h
Maximum Speed Approx. 27 km/h
Max Incline 7 degrees
Power Requirements 3-phase non-RCD protected (hard-wired in)
Drive Type Hydrostatic drive (electric / hydraulic)
Roof Included if required
Fan High flow, front gate mounted
Belt Condition Near new

Comes with a full reservoir of belt silicone oil (approx. 5 litres)

 

*No modifications have been undertaken which takes the machine away from original design specifications apart from the fan

DETAILS

We have just taken delivery of this little gem of a Classic branded trotting / cantering treadmill which has the short deck design.

Russ used to service this machine up until a few years ago and since then, it has done very little work. Since we have taken delivery of it, we have given it a good going over and replaced various components to bring it up to tip top shape. Servicing has been completed so you shouldn’t need to worry about this for another 6 to 12 months, depending on usage. All of the electricals have been checked over and new switches and control box have been installed.

A new high flow front fan on a custom fabricated gate mounted frame will be included with the treadmill. It even comes with a matching roof (not pictured) which bolts to the sides, so you don’t need to keep it inside.

Please note that the gallery photos of this treadmill are photos of a similar treadmill with a roof.

This machine will be ready for delivery from Late August.

Expressions of interest for this treadmill are now open. If a rental option suits you better, please reach out to Russ on 0431 437 127 for details, as we would be happy to accommodate.

Contact Us

Request a quote

If you would like to learn more about our products and services or have a specific engineering need that requires a quote please fill out the attached form.